Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Join Date
    Jan 2014
    Posts
    2

    Default Part needed for my 2000 Moomba Mobius but do not know what it is called???

    I need to find a replacement part for our 2000 Moomba Mobuis but not sure what the part name is. It's located on the back lower portion of the boat & there is one of each side. Please see the attached picture. We believe it is part of the ballast system where the water is sucked it but not sure. Thanks for any help you can give!
    Attached Images Attached Images

  2. #2
    Join Date
    May 2011
    Location
    Fort Worth
    Posts
    1,415

    Default

    I think that is the speedo??? Others may know better
    '08 Mobius LS

  3. #3
    Join Date
    Jun 2013
    Location
    Naperville, IL || North Scott Lake, MI
    Posts
    672

    Default

    I would concur -- looks like the speedo to me
    Mike

    2013 Outback V
    2003 SeaRay 182 -- gone but not forgotten...

  4. #4
    Join Date
    Nov 2009
    Location
    Kaukauna, WI - 3minutes from glass
    Posts
    1,754

    Default

    Did it break off? If it isn't leaking time to install PP stargazer with GPS for speed.
    -Mark
    14 Mojo - Waiting patiently for my build date.
    02 Mobius LSV ---- Sold and always will be remembered as the one that started it all.

    "Hey you only live once"

  5. #5
    Join Date
    Jan 2014
    Posts
    2

    Default

    Thanks guys! That's what it is & going to get two new ones ordered!

  6. #6
    Join Date
    Aug 2011
    Posts
    1,089

    Default Re: Part needed for my 2000 Moomba Mobius but do not know what it is called???

    Why bother, use that money for a prefect pass..

    Sent from my Nexus 5 using Tapatalk
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV

  7. #7
    Join Date
    Dec 2006
    Location
    Tuscaloosa, Alabama
    Posts
    736

    Default

    It is called a pitot(sp) tube.
    Jack Beams
    '05 Outback DD
    325HP EFI Indmar

  8. #8
    Join Date
    Oct 2013
    Location
    Ft. Collins, CO
    Posts
    179

    Default

    Why are you replacing them? Pitot tubes commonly get plugged with sediment and the result is the speedo fails. You can usually unscrew the tube and clean things out.

    But if you didn't know it was part of the speedo... how did you know it needed to be replaced?
    2007 Mobius LSV
    1989 Sanger Skier DX - sold

  9. #9
    Join Date
    Aug 2013
    Location
    DFW
    Posts
    380

    Default Part needed for my 2000 Moomba Mobius but do not know what it is called???

    ^^^^^ this
    Matt
    2012 LSV
    4 XM9 Towers
    Javelin & XM30.2
    Xi 12DVC Sub
    2 6V Golf Cart Batteries
    FAE

  10. #10
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    11,301

    Default

    Need to pull the line loose from the back of the speedometer and blow it out. They get water up in them sometimes. Or they get pinched. That's why you have two speedos for tournament use. If they were worth a crap you'd only need one. (By the way, you can make your boat a lot faster by drilling the hole out a little bit.)
    My Mom said I'm not allowed to get wet!
    2008 LSV
    2000 Outback LS (sold)
    Exile Tunes
    PWI
    LLTR!!!!!!!!



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •