Results 1 to 5 of 5

Thread: Thermostat

  1. #1
    Join Date
    Sep 2013
    Posts
    2

    Default Thermostat

    Question on thermostats,
    Removed the thermostat last fall to winterized the boat and now can't figure out if it goes on the intake manifold or between the thermostat housing? It's a 2 piece housing with 3 bolts vortec sticker on the top.lower section has the water intake hoses and top section has the hoses to exhaust manifolds
    Both spots has a notch for a thermostat
    It's a 2004 moomba with a indmar vortec 350
    Any help would be Appreciated
    Adam

  2. #2
    Join Date
    Mar 2010
    Location
    Irondequoit Bay, NY
    Posts
    1,298

    Default

    mine went under the 3 bolt..i think it it looks kinda like a triangle if i remember
    2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
    Rockford fasgate cabins
    Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
    Exile XM7's
    Exile Harpoon
    Exile ZLD
    Polk 10in sub (2)
    Polk P330 amp (subs)

  3. #3
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    4,076

    Default

    Usually between manifold and housing (on the manifold). Can you see a little recess ring on the manifold for it to sit in?
    Old enough to know better, young enough to do it anyway.

    2001 MobiusV

  4. #4
    Join Date
    Sep 2013
    Posts
    2

    Default

    Yes there is a re
    ssessed rim on the manifold but the upper triangle piece also has one to?

  5. #5
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    4,076

    Default

    I want to say that the spacer/splitter is for better hose clearance and angles. Most automotive applications have the thermo right in the manifold.
    Old enough to know better, young enough to do it anyway.

    2001 MobiusV

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •