Page 1 of 3 123 LastLast
Results 1 to 10 of 25

Thread: vinyl

  1. #1
    Join Date
    Mar 2010
    Location
    Irondequoit Bay, NY
    Posts
    1,298

    Default vinyl

    thinking about redoing the seats in my boat..dont seem to hard with some spray adhesive and some sowing..im thinking carbon(looking) blue and some charcoal grey..boat is blue and white. i also sprayed the tower in a plastidip black( everything is holding up besides where the speaker mounts were when we moved them a little and ripped a little off ). also planning on doing the windows in a tint. depending on how much all this repairs will cost
    im wondering what yall would think with blue and charcoal..the carpet is a light grey but i plan on redoing that as well.
    Last edited by motosno963; 03-08-2014 at 08:14 PM.
    2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
    Rockford fasgate cabins
    Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
    Exile XM7's
    Exile Harpoon
    Exile ZLD
    Polk 10in sub (2)
    Polk P330 amp (subs)

  2. #2
    Join Date
    Jun 2012
    Location
    Portland Oregon
    Posts
    803

    Default vinyl


    Not quite charcoal but some blue and gray for you.
    -Jake

  3. #3
    Join Date
    Mar 2010
    Location
    Irondequoit Bay, NY
    Posts
    1,298

    Default

    im thinking no white for the seats but i dont know yet..i wish i was good at photoshop haha i could take a pic of my interior and photoshop it with the charcoal and blue
    2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
    Rockford fasgate cabins
    Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
    Exile XM7's
    Exile Harpoon
    Exile ZLD
    Polk 10in sub (2)
    Polk P330 amp (subs)

  4. #4
    Join Date
    Mar 2010
    Location
    Irondequoit Bay, NY
    Posts
    1,298

    Default

    anyone know what else to go with new vinyl?.. i think some spots have like a clear plastic under the vinyl?
    2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
    Rockford fasgate cabins
    Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
    Exile XM7's
    Exile Harpoon
    Exile ZLD
    Polk 10in sub (2)
    Polk P330 amp (subs)

  5. #5
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    4,044

    Default

    If I were you I'd copy Jake! He sent me a ton of pics and his looks schweeeeeeeeeeeeet.

    I'm not a big fan of white vinyl in a white hull because one or the other is always going to be off a little or look dirty.

    Charcoal is going to look almost black from just a little ways away and definitely gets hot. If you're looking for a high contrast finish then charcoal with a bright blue and some lighter gray would look sharp IMO. Hard to beat the combination of light/dark with a bright color to set it off. If you don't go with carbon fiber, you can do other accents, stitching or patterns to change it up. Mine is all lightly textured Naugahyde with some style mixed in.

    Like dis-









    (shameless self plug done)
    Old enough to know better, young enough to do it anyway.

    2001 MobiusV

  6. #6
    Join Date
    Mar 2010
    Location
    Irondequoit Bay, NY
    Posts
    1,298

    Default

    Well I'm going to do it myself with a person who can use a sowing machine so it won't be as nice as yours haha..not a big fan of the white on the seats haha . I deff wanna do some textured vinyl and carbon will be one of them. How hard was the captains seat? I think that will be the hardest
    2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
    Rockford fasgate cabins
    Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
    Exile XM7's
    Exile Harpoon
    Exile ZLD
    Polk 10in sub (2)
    Polk P330 amp (subs)

  7. #7
    Join Date
    Jun 2012
    Location
    Portland Oregon
    Posts
    803

    Default vinyl

    -Jake

  8. #8
    Join Date
    Mar 2010
    Location
    Irondequoit Bay, NY
    Posts
    1,298

    Default

    yeaa that in blue
    2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
    Rockford fasgate cabins
    Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
    Exile XM7's
    Exile Harpoon
    Exile ZLD
    Polk 10in sub (2)
    Polk P330 amp (subs)

  9. #9
    Join Date
    Jun 2012
    Location
    Portland Oregon
    Posts
    803

    Default vinyl



    -Jake

  10. #10
    Join Date
    Jun 2012
    Location
    Portland Oregon
    Posts
    803

    Default vinyl

    -Jake

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •