Results 1 to 10 of 10

Thread: ,l\eecwxv|

  1. #1
    Join Date
    Apr 2012
    Location
    NC
    Posts
    55

    Default ,l\eecwxv|

    nbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbmv
    2008 Outback

  2. #2
    Join Date
    Jun 2008
    Location
    De Pere WI
    Posts
    4,178

    Default

    someone had a little to drink tonight
    '06 Supra Launch 20SSV-gone but never forgotten

  3. #3
    Join Date
    Jun 2013
    Location
    San Antonio/Marble Falls
    Posts
    25

    Default ,l\eecwxv|

    Quote Originally Posted by sandm View Post
    someone had a little to drink tonight
    Putting those koozies to good use


    Sent from my iPhone using Tapatalk

  4. #4
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    11,256

    Default

    I'll have to check back around 11 pm and see if that post makes more sense.
    My Mom said I'm not allowed to get wet!
    2008 LSV
    2000 Outback LS (sold)
    Exile Tunes
    PWI
    LLTR!!!!!!!!



  5. #5
    Join Date
    Jun 2008
    Location
    De Pere WI
    Posts
    4,178

    Default

    Quote Originally Posted by kaneboats View Post
    I'll have to check back around 11 pm and see if that post makes more sense.
    if it does, it's been a good night
    '06 Supra Launch 20SSV-gone but never forgotten

  6. #6
    Join Date
    Apr 2012
    Location
    NC
    Posts
    55

    Default

    LOL Not Sure What That Was....Anyway, I'm going to be redoing my in boat speakers and was wondering if it would be a problem to run a 2ohm amplifier at 1.34ohm
    2008 Outback

  7. #7
    Join Date
    Apr 2012
    Location
    NC
    Posts
    55

    Default

    Think I just answered my own question on how to wire my in boat speakers, I'll run them like this to see a 2.67 ohm load at the amp three speakers on the left and three on the right of a 4ch amp and bridge the other channels to the sub....
    http://www.colomar.com/cgi-bin/h_imp...ZxZxZxZxZxZxZx
    2008 Outback

  8. #8

    Default

    You are satisfying the amplifier's minimum impedance load requirement but ignoring the fact that you are distributing the power in an unequal manner. Try it first to see if you are pleased with the balance of volume between the speakers.
    While there will be a power difference but if you don't hear a difference then it is okay.

  9. #9
    Join Date
    Apr 2012
    Location
    NC
    Posts
    55

    Default

    Quote Originally Posted by David Analog View Post
    You are satisfying the amplifier's minimum impedance load requirement but ignoring the fact that you are distributing the power in an unequal manner. Try it first to see if you are pleased with the balance of volume between the speakers.
    While there will be a power difference but if you don't hear a difference then it is okay.
    thanks for the info hopefully it won't be that big of a difference
    2008 Outback

  10. #10

    Default

    I recently just redid all of my cabin speakers, like you had said, three to the left channel, 3 on the right channel in the 2.67 ohm's... no problem what so ever, It honestly sounds awsome!! my wife was impressed when we got out on the water and I cranked it up... I am running my towers currently off the same 4 channel for now, no problems as of yet.
    B.J. Reed

    2006 Moomba OBV

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •