Results 21 to 29 of 29
Thread: How to configure flow surf
04-05-2014, 12:28 AM #21
04-05-2014, 10:03 AM #22
04-06-2014, 04:50 PM #23Junior Member
- Join Date
- Jan 2012
Deployed my new flow system yesterday. The system is as advertised. Really cleans up the wake to the opposite side. I have 1000 lb bags in the back. I loaded each at 75% and the front 100%. Five adults in the boat. I distributed that weight evenly, except put one extra person in the front and one extra to the opposite side of the deployed flow. Best wake is on the driver side (prop rotation). Speed and size of wake vary. The wake opposite the flow never washed. I have video but I'm not sure how to load it. I did not need to stack the weight at the back and only on one side. Cant wait for the water temp to get to about 75.
04-06-2014, 09:23 PM #24
Our first attempts yielded some good waves with a little trial. we used all 3 stock ballast bags, wake plate down, 5 passengers in the back left, flow surf plate on middle position.
Still learning. we only tried surfing a few times as it was 51-56 degree water. we mostly skied.
Last edited by Horwitz; 04-06-2014 at 09:33 PM.
04-06-2014, 09:43 PM #25
We practiced with the flow surf system this weekend. it was a bit cold to practice surfing so we mostly skied. we used all bags full, drivers side plate setting 2, wake plate down, 5 passengers left rear. good wave, I think.
04-07-2014, 08:37 AM #26
I think the Flow Surf System is going to be good. But, I feel like the sales and marketing people are trying to say that you can fill up your factory ballast, deploy the flow fin, and you can wake surf. This probably is not true; you are still going to need a half a dozen friends in the boat to share the experience and build the wave. it is still not a two person sport...
04-07-2014, 12:30 PM #27
04-08-2014, 09:53 PM #28
04-09-2014, 09:46 AM #29Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >