Results 1 to 5 of 5
04-04-2014, 03:16 PM #1
Rear compartment separator wall thickness?
Can anyone get a quick measurement and let me know what the thickness is of the rear compartment wall / separator? (see below) Doesn't really matter what year/model boat you have.
I'm about to rebuild/replace my existing ones that aren't cutting it for the new split cushion sundeck support.
Debating on going with 1/2" vs 3/4". The 1100 bags put a fair amount of stress on it, but then again I'm wondering if going thicker is overkill as these sheets are spendy stuff.
At the time it seemed like a good idea...
04-04-2014, 03:35 PM #2
04-04-2014, 05:39 PM #3
Thanks Joe - do they seem beefy enough to you? My old ones are covered with carpet on both sides so it is hard to get a good idea of exactly how thick they are. But I can see they've flexed a little.At the time it seemed like a good idea...
04-04-2014, 06:15 PM #4
Re: Rear compartment separator wall thickness?
Last edited by jstenger; 04-04-2014 at 06:18 PM.Joe
2010 Outback V - Sold
04-06-2014, 05:49 PM #5Senior Member
- Join Date
- May 2013
3/4 is way over kill