Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Join Date
    Mar 2015
    Location
    Charlotte, NC
    Posts
    41

    Default OZ HD Tower with Rev10s

    I just bought a new mojo and working with my stereo guy there doesn't seem to be a great location for the Rev10s. I wanted them in the front corners but they would be an inch above my head! Any members have pictures of where they put theirs? THANKS!
    2015 Moomba Mojo
    Black Flake/Intense Green
    Shaved Emblems, 5% Tint, SeaBlazeX
    1100lb Rears Upgrade, Flow Surf System
    WS-420SQ, WS-Rev10s, JL 2x12w6, 6xMX650s, 2xM600/1, M600/6, M400/4

    2001 Supra 22SSV SOLD
    1991 Malibu Sunsetter SOLD

  2. #2
    Join Date
    Oct 2008
    Location
    Arkansas
    Posts
    673

    Default

    Mine are in the corner, where they started putting the bracket on a '15 OZ. All hidden, no wire shows.
    2014 Mojo Surf
    2013 Mojo Sold
    2010 LSV Sold
    2002 OB LSV Sold

  3. #3
    Join Date
    Mar 2015
    Location
    Charlotte, NC
    Posts
    41

    Default

    Can you post a picture?
    2015 Moomba Mojo
    Black Flake/Intense Green
    Shaved Emblems, 5% Tint, SeaBlazeX
    1100lb Rears Upgrade, Flow Surf System
    WS-420SQ, WS-Rev10s, JL 2x12w6, 6xMX650s, 2xM600/1, M600/6, M400/4

    2001 Supra 22SSV SOLD
    1991 Malibu Sunsetter SOLD

  4. #4
    Join Date
    Oct 2008
    Location
    Arkansas
    Posts
    673

    Default

    With the '15 tower you can’t put them in the same corner, unless you build a bracket to fit the factory bracket. Then there would be no way to hide the wires with them mounted there. Move them in on the horizontal bar or on the vertical bar.
    2014 Mojo Surf
    2013 Mojo Sold
    2010 LSV Sold
    2002 OB LSV Sold

  5. #5
    Join Date
    Mar 2015
    Location
    Charlotte, NC
    Posts
    41

    Default

    Seems no matter where in that corner I put them it's an inch from my head when the seat riser is up!! No good! So currently I have them mounted about 2 inches out from the bimini front rod holes.
    2015 Moomba Mojo
    Black Flake/Intense Green
    Shaved Emblems, 5% Tint, SeaBlazeX
    1100lb Rears Upgrade, Flow Surf System
    WS-420SQ, WS-Rev10s, JL 2x12w6, 6xMX650s, 2xM600/1, M600/6, M400/4

    2001 Supra 22SSV SOLD
    1991 Malibu Sunsetter SOLD

  6. #6
    Join Date
    Jul 2010
    Location
    Vicksburg, MI
    Posts
    731

    Default OZ HD Tower with Rev10s

    Try the forward tube just above the upper rack crossbar.
    Joe

    2014 LSV
    2010 Outback V - Sold

  7. #7
    Join Date
    Mar 2015
    Location
    Charlotte, NC
    Posts
    41

    Default

    Basically in the corner of the forward bar? No good.
    2015 Moomba Mojo
    Black Flake/Intense Green
    Shaved Emblems, 5% Tint, SeaBlazeX
    1100lb Rears Upgrade, Flow Surf System
    WS-420SQ, WS-Rev10s, JL 2x12w6, 6xMX650s, 2xM600/1, M600/6, M400/4

    2001 Supra 22SSV SOLD
    1991 Malibu Sunsetter SOLD

  8. #8
    Join Date
    Jul 2010
    Location
    Vicksburg, MI
    Posts
    731

    Default OZ HD Tower with Rev10s

    Here is mine on an OZ HD without the gusset. I thought there was room between the gusset and the crossbar on yours.

    Joe

    2014 LSV
    2010 Outback V - Sold

  9. #9
    Join Date
    Nov 2009
    Location
    Kaukauna, WI - 3minutes from glass
    Posts
    1,809

    Default

    Here's mine. Make sure you run extra wire for a three some and leave enough room.
    -Mark
    14 Mojo - 72 hours and growing
    02 Mobius LSV ---- Sold and always will be remembered as the one that started it all.

    "Hey you only live once"

  10. #10
    Join Date
    Mar 2015
    Location
    Charlotte, NC
    Posts
    41

    Default

    There we go!!! Minus the 420 in the center do you hit your head on the standalone rev10s?
    2015 Moomba Mojo
    Black Flake/Intense Green
    Shaved Emblems, 5% Tint, SeaBlazeX
    1100lb Rears Upgrade, Flow Surf System
    WS-420SQ, WS-Rev10s, JL 2x12w6, 6xMX650s, 2xM600/1, M600/6, M400/4

    2001 Supra 22SSV SOLD
    1991 Malibu Sunsetter SOLD

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •