On my list of winter projects was to give the boat an upper augmentation (Exile) and a tramp stamp (FAE). After 2 Saturdays, 1 Sunday, about 5 Amazon orders, countless trips to Lowes, and a case of beer (by my best guess), the audio portion is now 90% complete. Still outstanding are the sub enclosure, the ZLD install, amp tuning, and rotating my speaker grills. ZLD should be easy; sub work will be a little more involved, but all in all not bad. I thought I would post pictures of my install journey.

All the electrical goodies on the bench:

Here I'm measuring the gap of the supports so I know how much room I have on the back of my amp rack:

Once I have my measurements, I sketch out my amp rack layout:

Dry fitting the amp rack to make sure it will fit properly: