Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
  1. #11
    Join Date
    Jul 2013
    Location
    Cedar Falls, IA
    Posts
    403

    Default F/S Fulton F2 Winch

    Quote Originally Posted by mmandley View Post
    Exactly what I'm getting. I like the reviews and it has a Low Gear for when the boat is almost on the Trailer.

    With the LSV it was never an issue, I could drive onto the trailer and use slight power to overcome the boats weight while winching.

    The Mojo on the other hand doesn't self center soon enough and I proped the trailer last year. So now I only winch it on and the boat nose is so much heavier I'm cranking really hard. I have a bad L4 and L5 vertebra in my lower back and winching the boat on always causes pain.
    I propped mine last year as well, you might recall the posts last year. That was the main driver for the upgrade. I have a pic of the newly installed F2 posted in a few threads... Including my Exile install thread.

    You'll need a nice 1/2" bit for the two new holes and at least one more piece of hardware since the supplied bolts are too short for the square tube. Or maybe you already have the 3 hole pattern with the smaller F2...

    It still won't budge the boat on dry land but it's a solid improvement at the ramp... And it's appropriately sized for the application IMO.

    Enjoy!


    Sent from my iPhone using Tapatalk
    Last edited by uniwarking; 05-07-2014 at 04:13 PM.
    2013 Moomba Mojo 2.5
    Exile SXT9's, Xi12D, Javelin, 800.4, ZLD MKII

    2012 F150 Ecoboost

  2. #12
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    5,904

    Default

    Gtk I thought it was a direct swap.
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  3. #13
    Join Date
    May 2009
    Location
    Carlton Oregon
    Posts
    6,028

    Default

    Quote Originally Posted by jmvotto View Post
    Gtk I thought it was a direct swap.
    The F2 your getting JM is a direct fit. I unbolted the Factory unit and installed this one in about 10 minutes.

    I'm hoping the new one is a direct Fit but if not I'll make it work.
    Uniwarking have you used the gear reduction? Think you pull the handle out to the side and it changes gear speeds.
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    Exile ZLD
    6 SX65M Cabins
    6 XM9 Towers
    1 XI Big 15 Woofer in a custom Fiberglass box
    1 XI 1K Harpoon
    2 XI 800.4
    1 XI 2500.1
    2 Interstate 2400U 6V Golf Cart Batterties
    Custom 1 Off Evolution Cover

  4. #14
    Join Date
    Jul 2013
    Location
    Cedar Falls, IA
    Posts
    403

    Default F/S Fulton F2 Winch

    Yep, just slides out... The handle is long enough though that I don't think you'll really need it.

    It's a 3 hole mount but you'll have it done pretty fast.


    Sent from my iPhone using Tapatalk
    2013 Moomba Mojo 2.5
    Exile SXT9's, Xi12D, Javelin, 800.4, ZLD MKII

    2012 F150 Ecoboost

  5. #15
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    5,904

    Default

    Thanks mike, got it installed this weekend. The f2 took less than 5 minutes to change.

    Anyone else needs a factory winch I have barely used one , couple time a year since 2012 pm me if interested
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •