Results 1 to 8 of 8
  1. #1
    Join Date
    May 2007
    Location
    Ontario
    Posts
    30

    Default 07 LSV - Need new Tower Light

    The cheap $15 tower plastic light broke, so I need to either buy a new one (can't find where to buy it) or get something newer.

    Any ideas?

  2. #2
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    11,183

    Default

    I put one like this on but I think I found it for about $14 somewhere. I like it because it doesn't hit anything and doesn't stick out much.

    http://www.bakesonline.com/detail.aspx?ID=1667
    My Mom said I'm not allowed to get wet!
    2008 LSV
    2000 Outback LS (sold)
    Exile Tunes
    PWI
    LLTR!!!!!!!!



  3. #3
    Join Date
    May 2007
    Location
    Ontario
    Posts
    30

  4. #4
    Join Date
    May 2007
    Location
    Ontario
    Posts
    30

    Default

    But don't you need some kind of base mount for this?

  5. #5
    Join Date
    May 2010
    Location
    Salt Lake City, Utah
    Posts
    343

    Default

    this is the one I would like to get but it is expensive.

    http://samsonsports.com/tower-accessories/rope-savers/
    Scott
    2007 Mobius LSV with a lot of great upgrades and mods

  6. #6
    Join Date
    May 2007
    Location
    Ontario
    Posts
    30

    Default

    PHOTO REQUEST: Can I please get a photo of the NAV LIGHT base at the top of the Tower. I need to know what the base looks like before I order a new light. Can't remember if it's totally round or not.

  7. #7
    Join Date
    May 2007
    Location
    Ontario
    Posts
    30

    Default Light in Manual

    This is the light in the manual…and as you see, it's on the flat bar. But this could be the old Moomba tower and not the 2007 LSV Tower. This is why I want to see a photo. Also, if I wanted to get a new light on the top of the high rope mount, the wire probably will not reach.
    Attached Images Attached Images

  8. #8
    Join Date
    May 2007
    Location
    Ontario
    Posts
    30

    Default

    OK so I called Moomba and evidently they made a "special unit" made by Attwood for the tower (which was made by Extreme Tower). Moomba says the replacement light is part # 104306, but it's not cheap!

    The issue here is that the light is on the FLAT PART of that bay, so I can't just buy any light. Any ideas??

    Here is the light.
    http://www.rideaustralia.com.au/Supr...ighting/104306

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •