Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13
  1. #11
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    4,114

    Default

    I have a fix for that port if you can't get it. Ripped mine completely out of an 1180 bag. Replaced with new Flow Rite bulkhead fitting. Appears to be holding just fine after beating up on it this weekend.

    Old enough to know better, young enough to do it anyway.

    2001 MobiusV

  2. #12
    Join Date
    Jul 2008
    Location
    Des Moines, IA
    Posts
    2,602

    Default Integrated Bow Sac (Fly High Pro X)

    Good idea berg, but I think I've got it. I used water weld to repair the port, then agin to seal the threads, and again around the inside and outside. It's water tight and I expect it to hold up for awhile now.

  3. #13
    Join Date
    Jul 2008
    Location
    Des Moines, IA
    Posts
    2,602

    Default

    I'll sand it to make it look a little better once it's fully cured but it ain't pretty. The water weld is pretty impressive stuff if you haven't used it before.

    Anyway, I'll take $85 plus shipping if anyone is interested. I will include the fly high quick connects for each 3/4" leg port and the 1" fill port on the right leg that can all be capped if not needed. The left leg top port and center top port will include plugs.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •