Results 11 to 20 of 26
08-05-2014, 12:34 PM #11Member
- Join Date
- Jan 2011
- Western PA
Same "boat". I used silicon sealant and filled once. (this is our spare bag) and we don't fill it totally full, and the valve like that I made the top so it doesn't have as much weight on it all the time.2004 Supra 22 Launch SSV
325 Indmar Assault 320 HP
"One more hour"
08-05-2014, 12:40 PM #12
08-05-2014, 12:43 PM #13
You could use this one.
I have had good luck adding ports.Joe
2010 Outback V - Sold
08-05-2014, 12:46 PM #14
That works well but don't let a line get twisted or it will pull out. I have to put mine back with some 5200.My Mom said I'm not allowed to get wet!
2000 Outback LS (sold)
08-05-2014, 01:10 PM #15
Going to keep trying until something works!At the time it seemed like a good idea...
08-05-2014, 08:39 PM #16
Berg, try one of these, with that glue, straight or 90 should certainly be worth a try. I added a vent to my two port center bag a few years back and it worked well.
Oops did not read far enough.A Day at the Lake...Priceless
A Day in Powder...Endless
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
08-08-2014, 11:17 AM #17Member
- Join Date
- Apr 2014
I would be shocked if 3m 5200 wouldnt work. That stuff is so strong its stupid. Im about to use some of that on the threads of my 750 high flys cus they keep popping out when full.2002 mobius LSV
Lake Minnetonka, MN
08-08-2014, 11:36 AM #18
Problem is the port itself that is heat seated to the bag actually ripped. So I doubt any amount of gluing I would do would hold too long.
Just ripped the whole thing out last night and put in a 90* flow rite 1-1/8" bulkhead style fitting (looks like a thru hull). Then swapped the fitting on the hose to a straight flow rite 1-1/8" quick connect so I can still get the bag out easy. Gooped it with 5200 and cranked it all down tight. It "looks good" but who knows if it will hold.
(gouged it up a bit with a channel lock - only thing I had that was big enough for that nut!)
I read that the 5200 takes 7 days to fully cure (urgh) but this repair is only going to be about 36 hours old before it gets put to the test. Crossing fingers....At the time it seemed like a good idea...
08-08-2014, 11:49 AM #19
I told you that I had some extra 5200 fast cure and that home depot sells the 5200 fast cure for $9.
*shaking my head*2008 Moomba Mobius XLV. Monster Cargo Bimini, and more mods to comb...
1992 Supra Sunsport. **SOLD** 2k pounds ballast, Surf System, Blue LED's everywhere, decent audio system.
Tow Rig: 2013 F150 Ecoboost FX4 (wife's rig) Other money pits include:1998 BMW M3 Cabrolet, 2000 Jeep Wrangler rock crawler), 2002 Audic S6 Avant, 2005 Kawasaki ZX-6R 636.
08-08-2014, 12:01 PM #20
Gotta do whatcha gotta do when you're on the run and working late.
*raising middle finger and smiling*At the time it seemed like a good idea...