Results 1 to 6 of 6
  1. #1
    Join Date
    Aug 2002
    Location
    Corpus Christi, Texas
    Posts
    25

    Default Outback Propeller

    I want to purchase a spare propeller for my 1999 Outback. There are several propeller shops her in Corpus Christi but I need the specifications for the OEM prop. I have the 3 blade. Thank you.
    Bobby

  2. #2
    Join Date
    Apr 2003
    Location
    Powhatan, VA
    Posts
    316

    Default Prop

    Mine uses a 13 by 13 LH prop and the shaft size is 1 ".

    Your existing prop may have markings on the end of the brass hub that might be visible up close.

    You could check Overtons.com and SkiLimited.com on-line to compare prices. They will ship right to your house. I got one from the second place.

    Consider carrying a 1 1/16" wrench or big adjustable, a prop puller, and spare nut, washer, square keyway key, and cotter pin if your mission is to carry a replacement "just in case"...

    Also, a medium sized metal file ( mill file ) is sometimes needed to tweak the key to fit the slots on the shaft and prop....

    Good luck!

  3. #3
    Join Date
    Feb 2003
    Location
    idaho
    Posts
    18

    Default prop

    I just replaced my'98 mobius prop with an acme. For wakeboarding it is faster out of the hole and may have 1 or 2 less MPH top end. I bought it at propellors online and they have a table that tells what you need (matches OEM or upgrades) I can look at the numbers if you don't find yours on your current prop. I'm sure it is an o johnson 13x13 with some pitch number. Look near the shaft and you'll find those numbers.
    2005 XLV
    gravity 3
    perfect pass

  4. #4
    Guest

    Default <a href=''

    funny ringtones

  5. #5

    Default Replying to Topic 'Outback Propeller'

    I have a '99 outback... I have a 4 blade prop.... It is 13 X 13... If I am not mistaking... I had a really hard time getting it off... I bent the tips when I hit something in the river... I had to buy a prop puller to get it off... I heated it slowly and used a piece of wood to try and get it off... I tried 2 c clamps... Nothing worked... So I spent 119 dollars for the prop puller.... It came off with ease.... I then used a brass hammer and a piece of wood and gently taped it back in place... But I love the four blade... My top in is 40 to 41 mph.... Hope this helps.

  6. #6
    Join Date
    Jun 2006
    Posts
    194

    Default

    I replaced my OJ 13 X13 4 blade on my 04 Mobius with a three blade ACME 543, this thing did wonders for my boats perfromance.

Similar Threads

  1. Propeller for a XLV GG
    By TobesDubai in forum Sales & Information
    Replies: 3
    Last Post: 01-18-2007, 01:01 PM
  2. Propeller
    By alex in forum Wakeboarding | Wakeskating
    Replies: 3
    Last Post: 06-17-2006, 08:48 PM
  3. Propeller
    By ben624 in forum General Chat
    Replies: 5
    Last Post: 04-07-2006, 09:50 PM
  4. WHICH PROPELLER
    By Patton in forum Service & Repair
    Replies: 4
    Last Post: 07-20-2005, 01:45 AM
  5. Propeller
    By in forum Boat Owners
    Replies: 0
    Last Post: 05-18-2003, 10:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •