I know the hole patterns on slalom skis are not all the same, so they won't match - but what about wakeboards?
Would CWB bindings fit on a hyperlite board, or would I need to stick with hyperlite bindings?
Results 1 to 5 of 5
02-04-2008, 07:27 PM #1Senior Member
- Join Date
- Aug 2007
- Nashville, TN
Simple question - are bindings specific to board by brand?
02-04-2008, 08:46 PM #2
Not to Hi-jack your thread or anything, but I was wondering the same thing........
If Ronix bindings will fit other boards or if other brand bindings will fit Ronix boards...'99 Outback (Maroon/Creme) GM 350/Holley 4150
02-04-2008, 09:30 PM #3
I would think that they are all mostly interchangeable. We have 5 O'Brien boards with the following brand of bindings. The only issue is that sometimes the screws end up too short or too long and you have to make a trip to the hardware store for stainless bolts. Hope this helps
02-04-2008, 10:50 PM #4Senior Member
- Join Date
- Feb 2004
Most boards and binding are interchangeable. The only board and Binding I have seen that is different is the New Slingshot Wakeboard and Bindings. The mounting for these boards and Binding is more like snowboard bindings. Check them out.
02-08-2008, 12:45 AM #5
I put CWB bindings on my Hyperlite Motive last summer. They bolted right on. The CWB bindings are absolutely awesome. I got one of the hinge models. I can't remember which exact style, but they are great. I actually am expecting a new Motive set-up to arrive on my front door tomorrow from the FedEx guy.
By scoot_gt in forum Boat OwnersReplies: 3Last Post: 05-22-2007, 12:55 AM
By racerready in forum Service & RepairReplies: 10Last Post: 04-10-2007, 02:29 AM
By Smrtz in forum Wakeboarding | WakeskatingReplies: 6Last Post: 05-08-2006, 11:15 AM
By wakbrdfreak19 in forum Wakeboarding | WakeskatingReplies: 8Last Post: 03-28-2005, 09:49 PM
By wakbrdfreak19 in forum Moomba ClassifiedsReplies: 0Last Post: 03-14-2005, 04:57 PM