Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    5,866

    Default Our 07 OBV is finaly home

    After picking her up yesterday (deck project before and after pickup)we got her in the water today without a hitch, even walked her into the lift without an issue( thanks to the Lift BB gurus)







    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  2. #2
    Join Date
    Jun 2007
    Location
    Rice Lake, Ontario
    Posts
    695

    Default

    What a great looking boat... and lift!
    2006 Moomba Mobius LSV
    Lake: Rice lake, Ontario
    Stereo: Kenwood KMR-550U
    Ballast: 750 Surfside locker, 400 Surfside mid boat, 400 Gravity I, 400 Bow
    Surfboards: Inland Surfer Red Woody, Triple X Composite X 58"

    If you're from the area and want to surf, send me a PM!

  3. #3
    Sled491 Guest

    Default

    Holy Crap that lift is Huge! What is it rated for, and is the lift motor 120 or 12v

  4. #4
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    5,866

    Smile

    Sled,

    the hoist hold up to 4000lbs ( moomba is 3000) the canopy is 25ft so room for expansion up the line of moombas.

    I had the choice of 120v or 12v, decide i would run conduit along the dock with a gfi on the end for the 120v.
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  5. #5
    Join Date
    Apr 2006
    Location
    Neely Henry, AL (live in Atlanta)
    Posts
    161

    Default

    That lift is schmancy! ...but then again, I boat in Alabama

  6. #6
    Join Date
    Mar 2008
    Location
    Vancouver WA
    Posts
    2,630

    Default

    how do you clear the tower on the lift. looks like you will hit it going in and out.
    Sorry I cant find the jealousy icon with this new format!

    Great looking boat. Enjoy!

  7. #7
    Sled491 Guest

    Default

    JV, see I'm adding a motor to my lift but I think I'm giong to sue 12V so that I can avoid running the conduit that I would have to remove each winter when I pull my docks, and s I need over 100 ft of dock to get to the water I need that's a lot of conduit.

    And yes by the way where is the Jealousy Icon, that lift is very nice, way nicerer than mine!

  8. #8
    Join Date
    Apr 2007
    Location
    Las Vegas, Nevada
    Posts
    1,582

    Default

    Great looking boat. I love the set up. Same hear with the jealous symbol.
    Tazz 07' Moomba LSV --Kicker Marine Amps (MX700.5 & MX350.4) 6 polk DB651 speakers, 4 MB Quartz Marine Speakers, 10" Boston Acoustic Sub, Z-5 Cargo Rack, Custom Speaker/Light Bar, modified ballast system, Custom LED Rings
    Live life to the extreme and no less!!

  9. #9
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    5,866

    Cool

    Newty,

    I have about 12" to 18" of clearance with the boat in the water. Currently the water is about a foot higher than normal. so the in an out is fine.

    Canopy on next, mfg sent wrong color (cobalt blue) vs the tan we ordered.
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  10. #10
    Join Date
    May 2007
    Location
    Richmond, VA
    Posts
    1,794

    Question

    JV - Two questions: 1) How did you get the lift seated on the lake bed? It looks like there was a float under each of the four pads for the purpose of moving the lift into position by the pier. Thinking that maybe you pulled each float one at a time and dropped that leg of the lift until its pad rested on the lake bed. 2) Also, how awkward, if at all, is it to snap on the cover without having a pier from which to operate on the port side of the boat? Curious about how things work. Thanks. - Deerfield

    By the way, very nice set up!
    Last edited by deerfield; 05-13-2008 at 01:30 PM.
    2007 Outback
    2012 RAM Crew Cab
    Stuart

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •