DIY fake a lake

[mcdye]

Still learning. On my it does go through the VDrive, then thru I would guess a transmission cooler (based on the hoses), then to the impreller. It seems logical and easier to use in the input of the VDrive.

[mcdye]

Here is my out of water adapter, I removed the VDrive inlet hose and attached it there. Tested this weekend, worked awesome and not a big mess in the driveway as with a plunger or in the boat either. I wanted clear hose to make sure not sucking dry and did not have to turn the water on full blast. Cost less then $8 with items from lowes.

[REDFIVE48]

Here is my out of water adapter, I removed the VDrive inlet hose and attached it there. Tested this weekend, worked awesome and not a big mess in the driveway as with a plunger or in the boat either. I wanted clear hose to make sure not sucking dry and did not have to turn the water on full blast. Cost less then $8 with items from lowes.

Where are all the pictures? Is anyone else having trouble seeing the attached thumbnails on this and many other posts? Am really trying to get a picture of the DIY Fake a Lake but can't pull any up?

[brain_rinse]

We lost a lot of pics in the last forum upgrade, sorry!

[kaneboats]

Sombody throw up a pic of the toilet plunger with a fitting in it, please?????????

[jmvotto]

Home depot about 10 bucks.

[REDFIVE48]

mcdye - can you post the pictures of your fake a lake again, and if possible a part list?

Thanks!

[chawk610]

Here's the parts list for mine.

cooler.jpg

[wolfeman131]

a part list?

plunger
hose connector
beer

[parrothd]

plunger
hose connector
beer

Wow, you guys are fancy didn't think of the hose connector, I just drilled hole and stuck the hose in it..