Results 1 to 4 of 4
  1. #1
    Join Date
    Apr 2003
    Location
    Powhatan, VA
    Posts
    316

    Default Ed; Yellow Mob et al: Need Engineer help!

    OK guys. Need to figure out how to get my new dog into the boat. This varmit is a water dog by heredity and I want to find a way to have fun with it on the water this summer.

    If I can get it onto the platform, it can step into the boat. Can't figure out how to help it onto the platform.

    Need some sort of step rig. Gotta be easy on the dog's back section and hips, though.

    Any ideas would be GREATLY appreciated.

  2. #2
    Join Date
    Jan 2003
    Location
    Minnesota and Wisconsin
    Posts
    1,145

    Default Replying to Topic 'Ed; Yellow Mob et al: Need Engineer help!

    I assume you mean from the water onto the platform, right?

    I am thinking something made of electrical conduit and ripstop nylon.
    Think about downhill skiing and the gates that they use for Giant Slalom. Two poles with a fabric flag between them. If you change the poles so that they are not parallel, but rather spread out toward the bottom, like an A-Frame. In this case wide enough so you could hook them through the stern eyes. You would need another pole across the top of the A. (Remember the old indian Travois?) The pole would be long enough and the fabric would be located such that it would be just below the surface of the water and angled down and way. You may actually need to bend the poles for desired effect.

    The idea here is to have a submerged cloth 'tramp' where the cross member of the A is close enough to the platform so that once the dogs front feet are on the platform their back legs can tuck up and either get their toe nails into the fabric or catch the cross member. This is why it is important to have the tramp under water and angled away.

    If you are concerned about people not being able to use the platform when this is installed you could modify the design so that your device attaches to a bar that runs between the stern eyes. This would allow the device to be a lot narrower.

    You could prototype this from parts salvaged from an old pup tent.

    Good luck.
    Dave
    If you believe something to be true, it will be - in it's consequences.
    http://bensonwdby.home.comcast.net/

    2009 MasterCraft ProStar 197 - DD - 5.7L - 325HP - Zero Off

  3. #3
    Join Date
    Mar 2003
    Location
    s.e. washington state
    Posts
    2,119

    Default Replying to Topic 'Ed; Yellow Mob et al: Need Engineer help!

    I have a golden retreiver and I use a harness that fits around the front legs and chest which allows me to lift him up from the front while I'm standing on the deck and then he can catch his back paws on the deck and pull himself up. My daughter does dog shows so she dremels the claws so they won't puncture the vinyl while jumping in. You can also open up a life jacket and put across the seat.
    1998 Mobius
    310 HP PCM

  4. #4
    Join Date
    Apr 2003
    Location
    Powhatan, VA
    Posts
    316

    Default Replying to Topic 'Ed; Yellow Mob et al: Need Engineer help!

    Thanks for replying. The dog is about twice as large as a lab so I can't lift it and am going to need something real sturdy. Maybe the fabric idea with a bit more heavy duty structure, kind of like one of those fold-up fabric chairs positioned deeper and back from the platform. Maybe I can hinge it from the platform and flip it down into position.

Similar Threads

  1. Inland Surfer Yellow Loogey
    By qb12 in forum Moomba Classifieds
    Replies: 11
    Last Post: 02-21-2008, 03:05 PM
  2. Yellow Stains in Vinyl LSV 2007
    By mvd in forum General Chat
    Replies: 6
    Last Post: 09-03-2007, 10:12 PM
  3. yellow mobius/Memorial Day???
    By bobwells in forum General Chat
    Replies: 0
    Last Post: 05-29-2007, 08:03 AM
  4. Replies: 0
    Last Post: 02-04-2004, 11:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •