Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24
  1. #21
    Join Date
    Mar 2008
    Location
    Vancouver WA
    Posts
    2,631

    Default

    mmandley when you get ready to remove it, use a cordless and carefully remove each screw. About halfway (starting from the bow) you will find one that spins but doesn't back out. From what I can remember the nut is above the forward cupholder under the dash and about 6 inches back for the storage door opening on the oposite side. Its easiest if you find the screw that doesn't turn out and then look. You will have a better point of refference.
    You going to do your windows?


    PWI as usual...

  2. #22
    Join Date
    May 2009
    Location
    Carlton Oregon
    Posts
    6,044

    Default

    Yea i was thinking of doing them next month maybe need to look into seeing how much it would cost to get them done. i might try it myself if i get them off the boat like were talking. Ive done graphic and pin striping and all sorts of other things on cars so i wouldn't think window tint is to much more. Just have to have the window clean and sorta soapy to move the tint around then use a good squidgy to smooth it out.
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    Exile ZLD
    6 SX65M Cabins
    6 XM9 Towers
    1 XI Big 15 Woofer in a custom Fiberglass box
    1 XI 1K Harpoon
    2 XI 800.4
    1 XI 2500.1
    2 Interstate 2400U 6V Golf Cart Batterties
    Custom 1 Off Evolution Cover

  3. #23

    Default

    Just had mine done this past week.....I love it! I went with limo tint with no piecing. Its tough to get it all the way to the edge without taking the window out but I used some thin, black pin stripe around the edges and that took care of the small gaps.

    Sets my black boat off so much nicer now......very happy. I had it out on the water for the first time yesterday and had no problem seeing during the day. As it starting getting dark it was more difficult to see but nothing I can't live with.

    I paid $175.00



    Another....



    Back side...


  4. #24
    Join Date
    Mar 2008
    Location
    Vancouver WA
    Posts
    2,631

    Default

    Looks good!


    PWI as usual...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •