I want to add fresh water strainer to my boat, '02 OB LSV. From what I understand there is a strainer in the transmission cooler but have not checked. If so, that one would be a beetyoch to check/clean regularly.
I am not sure of the measurement of the Sherwood strainer with the elbows so I am hoping someone has been there before and can add some insight.
I prefer not to move the fitting on the vdrive just from the fear factor. The one picture I found had the fitting on the vdrive turned up but it appears on my rig there is not even enough room with my floor cover. I donít see an option as to locating after the vdrive either prior to the trans cooler.
I currently see 2 options. I am not sure of the effect of adding the extra 90ís but it seems option 2 would be the best.
Results 1 to 10 of 16
Thread: Project - Fresh Water Strainer
03-31-2009, 08:49 AM #1
Project - Fresh Water Strainer...thoughts?
Last edited by mcdye; 03-31-2009 at 05:35 PM.2014 Mojo Surf
2013 Mojo Sold
2010 LSV Sold
2002 OB LSV Sold