Thanks guys, I have my parts ordered.
I am not sure how I am going to lay it out yet. I want to mount with the strainer bowl down. If room premits I might get brave and change the elbow on the vdrive to a straight. I have seen a picture of one change but can't find it.
Some test fit plans are from the hull strainer to the vdrive are:
1. elbow pointed down, strainer, elbow horizonal to existing vdrive elbow.
2. elbow pointed down, strainer, elbow horizonal, another elbow to turn to existing vdrive elbow.
3. elbow pointed down, strainer, straight nipple to changed straight nipple on vdrive.
Results 1 to 10 of 16
Thread: Project - Fresh Water Strainer
04-07-2009, 08:45 AM #11