Thanks guys, I have my parts ordered.
I am not sure how I am going to lay it out yet. I want to mount with the strainer bowl down. If room premits I might get brave and change the elbow on the vdrive to a straight. I have seen a picture of one change but can't find it.
Some test fit plans are from the hull strainer to the vdrive are:
1. elbow pointed down, strainer, elbow horizonal to existing vdrive elbow.
2. elbow pointed down, strainer, elbow horizonal, another elbow to turn to existing vdrive elbow.
3. elbow pointed down, strainer, straight nipple to changed straight nipple on vdrive.
Results 11 to 16 of 16
Thread: Project - Fresh Water Strainer
04-07-2009, 08:45 AM #11
04-13-2009, 07:57 AM #12
Project completed this weekend.
I was hesitate to use another elbow but it was the only way to add the strainer once I started to dry fits.
04-13-2009, 10:11 AM #13Sled491 Guest
Very clean installation. How difficult is it to undo the cup and empty it from that location?
04-13-2009, 11:00 AM #14Senior Member
- Join Date
- Jun 2008
- Eugene OR
Have you tested how the water flow is with that 2nd elbow?2008 Outback V
“Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill
04-13-2009, 11:18 AM #15
04-13-2009, 11:26 AM #16