A while back I posted the thought of upgrading my old small sprinkler valves to a newer style by irritrol. First I needed to build a way to flow test them since the boat is still in the garage. I ended up pulling everything out of the boat and re-assembling it on two saw horses. I made a fitting on the side of a 5 gallon bucket and screwed my 2000 gph Rule pump to it. I then hooked the manifold to the side of one of the saw horses. I also wired the pump and solenoids to a set of switches and then to the battery. I did five different tests timing how long it took to transfer five gallons of water from one bucket to another. Here are the results:
Note: I have 3bags @ 450lbs bags and a rule 2000 gph pump and the timings will reflect this.
I will post actual lake timings in about 3 weeks.
Results 1 to 9 of 9
Thread: Balast Valve Upgrade
04-19-2009, 01:12 PM #1
Balast Valve Upgrade
04-19-2009, 08:03 PM #2
Nice Jesse. I still need to water test mine. I have everything wired and ready to go. I hope to hit the water this weekend. The weather is getting better here in
TazzTazz 07' Moomba LSV --Kicker Marine Amps (MX700.5 & MX350.4) 6 polk DB651 speakers, 4 MB Quartz Marine Speakers, 10" Boston Acoustic Sub, Z-5 Cargo Rack, Custom Speaker/Light Bar, modified ballast system, Custom LED Rings
Live life to the extreme and no less!!
04-19-2009, 09:13 PM #3
Jesse, that's awesome, that could have been dangerous at Keg parties in CollegeA Day at the Lake...Priceless
A Day in Powder...Endless
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
04-19-2009, 11:16 PM #4Senior Member
- Join Date
- Jun 2008
- Eugene OR
That is great. Love the on off switch. could be an issue if water starts splashing around. That is a great setup.2008 Outback V
“Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill
04-19-2009, 11:32 PM #5
04-20-2009, 03:43 PM #6
Great Info JesseC. Can you confirm if the new valves you tested were 3/4" like the factory valves?
Did you happen to do any testing of the old factory valves with the springs removed (per Newty's find a couple months ago)?
04-21-2009, 01:51 AM #7Senior Member
- Join Date
- Apr 2009
That is some great quantitative data on the difference between quarter turn and diaphragm valves. Thanks for posting!WakeMAKERS | WakePROPS | WakeSOUNDS | EasyBoatCare
04-23-2009, 12:55 AM #8
04-26-2009, 09:41 AM #9Sled491 Guest
Man Jesse you sure do your homework, Impressive!