So I have let my adapter for my trailer on the back of my rig about 4 times now and lots one. Since my boatmate trailer has a flat 5 and my tow rig has a RV round 7 I have an adapter. Well I have decided to wire up a fixed RV round 7 so I will not have to worry about losing another one.
So first off my trailer came with a rig side flat 5 so I just used this. I went to Autozone and picked up a RV round 7, and black tubing for the cables. I also picked up a flat 2 for the reverse break release that you will see in the Pic’s but after playing with the lights today I no longer need.
More or less what I will end up doing is keeping the flat 5 on the trailer and plugging my adapter into this and putting the extra wire in the tong of the trailer.
My first idea was to plug into the flat 4 that is inside the swing away tong but that will only give you the right side of the trailer lights. So instead of cutting wires and putting everything back together I just made the adapter and plugged it into the flat 5 that is already on the trailer. I will have finished pics when i am finished next week.
Results 1 to 4 of 4
Thread: Trailer Electrical harness
05-01-2009, 07:09 PM #1Senior Member
- Join Date
- Jun 2008
- Eugene OR
Trailer Electrical harness2008 Outback V
“Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill