Results 21 to 30 of 198
Thread: my 08 LSV mods
07-21-2009, 12:01 AM #21
Brain i'm assuming that sub enclosure is a premade box of MDF? If so in that position you can get water, especially coming over the bow and if it hits that MDF it'll swell and crumble so fast you won't believe it! Being as you can't see it i would recommend you pull it, strip that carpet and coat it twice with resin or spray on truck bed liner.
You can always put the carpet back on if you wish. I'm just saying ... seen it happen more than once!2007 Mobius LSV
07-21-2009, 09:15 AM #22
07-21-2009, 10:33 AM #23
There ya go, that should hold the water demons back!2007 Mobius LSV
07-21-2009, 12:09 PM #24
Have you powered up the Fusions yet? If so, how do you like them? Getting good reviews all over the place. What a steal at $115.
Mine showed up yesterday.Sold my Moomba. Currently boat whoring.
Set Ups - 09 CWB Transcend Platinum w/ 09 Ronix Cells (his) and 08 Liquid Force Angel w/ 08 Alloys (hers)
07-21-2009, 01:37 PM #25
07-22-2009, 05:18 PM #26Member
- Join Date
- Jul 2009
07-23-2009, 09:30 AM #27
09-17-2009, 05:27 PM #28
10-30-2009, 10:59 AM #29
ski locker drain plug
I put this together to keep the backwash from the bilge from entering the ski locker. I couldn't find a plug to fit tight so I picked up an inch and a half marine plug and ground down to rubber to the right diameter. Replaced the nut with a wing nut and cut off the bottom edge to fit.
Last edited by brain_rinse; 01-31-2013 at 08:54 PM.
01-27-2010, 10:57 PM #30