clear transom guard?

[alex56]

i think there was a threat already like this,

does anyone know of were or any company who makes like clear plastic stuff so the back of the boat doesnt get dinged wile surfing

[brain_rinse]

3M makes the clear vinyl film you're thinking of. It's a popular addition to the front bumper of cars to prevent rock chips, usually called "clear bra." I've seen it available at some of the nicer window tinting and auto detailing shops. This may help too: http://solutions.3m.com/wps/portal/3..._the/Consumer/

[mmandley]

I think this is what your looking for. Its much thicker then the stuff used on your car and actually a lot cheaper. I'm going to get this soon too.

https://www.savvyboater.com/p-441-ke...somshield.aspx

[brain_rinse]

I think this is what your looking for. Its much thicker then the stuff used on your car and actually a lot cheaper. I'm going to get this soon too.

https://www.savvyboater.com/p-441-ke...somshield.aspx

Yeah, that is cheap. 3 feet is the smallest height... wow. If you're only covering the part of the transom thats susceptible to board hits you could split that piece at least 4 ways!

[Razzman]

Check this out ... http://www.keelshield.com/transomshield.html

[alex56]

i think razzman found the best!

[yearround]

i think razzman found the best!

it the same stuff, razz is direct, mandley is not, but cheaper?

[Boonejeepin]

I used some 3m rubberized grip tape.

About $8 from the marine supply store.

ImageUploadedByTapatalk1358644808.171564.jpg

[mmandley]

I used some 3m rubberized grip tape.

About $8 from the marine supply store.

ImageUploadedByTapatalk1358644808.171564.jpg

Going to have to have a look at that Russ. I know i meant to put something on Fierah and never did. I played hell trying to get those scratches buffed out. I would cringe each time i herd a board smack the boat when someone was gearing up.

[Boonejeepin]

For the local guys - I found it in a bulk roll at Fisherman's.

It is recommended to round the ends vs. straight cuts.