Hard to explain, so hopefully the pics speak for themselves. I drilled a hole in the aluminum frame to allow a pin to pass through the frame and through the eye I screwed to the bottom of the sundeck. I did this front and rear on both sides. When the engine compartment is locked, and the pins are in place, you can't open the rear storage compartments.
Results 1 to 10 of 23
Thread: Locking rear storage *pics*
08-28-2009, 03:37 PM #1
Locking rear storage *pics*
08-28-2009, 04:21 PM #2
that's actually a real good idea. haven't really ever thought about theft, but that would take care of the basic "opportunity" criminals...
nice post..'06 Supra Launch 20SSV-gone but never forgotten
08-28-2009, 04:25 PM #3
That is a great idea.
Just wish my model had the engine hatch lock2014 Mojo Surf
2013 Mojo Sold
2010 LSV Sold
2002 OB LSV Sold
08-28-2009, 06:56 PM #4
So let me get this idea straight in my crooked mind.
You installed the hoop bracket on the underside of the Left and Right storage < ballast covers >
Drilled holes threw the aluminum framing from the engine compartment.
SO when you open the engine cover you install the pins threw the aluminum framing into the loop brackets.
Since the pins are in the engine compartment you can lock the engine cover to keep the side compartments locked as well?
I like the idea i really do. My only problem is my engine cover is a pain to open. When i grab the handle i have to hold the plastic case the handle folds down in to turn it. Other wise the entire thing turns.
I really like your idea because we leave the boat out on the street on nice weeks instead of taking it all down to get it in the garage and i always worry about peeps messing or looking in my compartments.Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
08-28-2009, 07:04 PM #5
08-31-2009, 02:19 PM #6
09-01-2009, 06:59 AM #7
I thought the moombas came with that setup from the factory. I guess only the supras have it. My 2003 supra launch had it from the factory. A little different bracket on the lid but the same exact setup. Nice job.
09-01-2009, 11:09 AM #8
09-01-2009, 01:10 PM #9
will snap some pics when I get home tonight
09-01-2009, 09:15 PM #102007 Mobius LSV