How do you do this? What exactly do you blow out? I have an 07 LS (Direct Drive). Which hoses do you blow through? Any have any pictures of this since a picture is worth a thousand words?
Thanks,
Garn
Results 1 to 4 of 4
Thread: Blowing Out the Heater?
-
10-10-2009, 01:49 PM #1
Senior Member
- Join Date
- Aug 2007
- Location
- Alpine, Utah
- Posts
- 149
Blowing Out the Heater?
-
10-11-2009, 11:51 AM #2
Take the two hoses off the engine that lead to the heater and blow compressed air through one of them until water won't come out anymore. One year I didn't use a compressor and I blew air into one tube and that works and I keep that to myself so you won't get a picture.
1998 Mobius
310 HP PCM
-
10-12-2009, 10:31 AM #3
you could also pump antifreeze in the front line till it drains out the back line
-
10-12-2009, 11:13 AM #4
Senior Member
- Join Date
- Jun 2008
- Location
- Eugene OR
- Posts
- 1,476
Garn, I just posted pic's under the winterzation process thred under service and repair. It is for a V Drive But i would think they would come off the same spots as the D Drive does. You can blow them out with your mouth just don't pass out becasue that would be a bad story to tell everyone.
2008 Outback V
“Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill

Reply With Quote