I have the wiring harness pictured below in my boat. Not sure if the LSV/XLV's have the same one or not. Im wondering what I can wire off of it? For instance my boat came with the gravity 1 and im upgrading, can I wire my other switches/pumps off this harness? What about adding a guage off of it?
Results 1 to 5 of 5
03-28-2010, 01:22 PM #1
Electrical/Wiring?06 Outback V
03-28-2010, 01:38 PM #2
Thats a pos/neg bus terminal and should be power supplied by the ignition switch. As long as whatever you attached is fused you can run anything within reason off of it to include the ballast switches i would think.2007 Mobius LSV
03-28-2010, 05:50 PM #3
I am using the terminal to power my ballast pumps. However, I notice recently that the breaker that supplies power to the terminal is 50 amps (it is located in by the battery). Would one need to increase this breaker if more "stuff" is running off the termial? Guess it depends on how much current everything is pulling. I might need to since I am running impeller pumps. What size breaker does a boat with stock GIII have by the batts?
03-28-2010, 06:33 PM #4
03-28-2010, 07:09 PM #5
From my understanding they put a fuse on the main wire that blows before the wires get too hot and fail too many amps will do that2007 Outback V