Results 1 to 8 of 8

Thread: Speaker Mount

  1. #1
    Join Date
    Sep 2014
    Location
    New Franklin, MO
    Posts
    85

    Default Speaker Mount





    Is this bracket for mounting a speaker?
    2015 Mobius LSV
    2008 SeaRay SLX

  2. #2
    Join Date
    Jul 2010
    Location
    Vicksburg, MI
    Posts
    576

    Default

    According to my dealer, yes.
    Joe

    2014 LSV
    2010 Outback V - Sold

  3. #3
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    5,987

    Default

    Tough spot to make the wires invisible.
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  4. #4
    Join Date
    Jul 2010
    Location
    Vicksburg, MI
    Posts
    576

    Default Re: Speaker Mount

    Quote Originally Posted by jmvotto View Post
    Tough spot to make the wires invisible.
    It is more than clear that Skiers Choice doesn't care about making wires invisible. If they cared, there would be a hole in the port side upright of the OZ and OZHD tower. Take a look at all the Moomba factory mounted speakers. There are wires hanging out on both sides.
    Joe

    2014 LSV
    2010 Outback V - Sold

  5. #5
    Join Date
    Dec 2012
    Location
    Ennis, TX
    Posts
    207

    Default Speaker Mount

    If you want invisible wires go with Exile!


    Sent from my iPhone using Tapatalk
    Shane
    2012 Mojo 2.5
    EXILED
    4 XM9 Tower
    6 SX65M Cabin
    1 XI 800.4
    1 XI 1500.1
    1MX 30.2
    EXILE ZLD
    Green LEDs

  6. #6
    Join Date
    Oct 2008
    Location
    Arkansas
    Posts
    651

    Default

    Quote Originally Posted by smorris7 View Post
    If you want invisible wires go with Exile!
    You had to go there

    Joe hit it right, with no hole in the port side upright of the OZ and OZHD tower most will drill a hole on the outside to jump over to the factory gromment hole, with more wires showing.

    It is not impossible to get them totally hidden on towers without the bracket mounts, just takes patience and a long drill bit going thru the factory grommet hole into the port upright. I have been told the factory has made request for the port upright hole, like the one on the startboard side, but it has not gotten done.

  7. #7

    Default

    There are many tower speakers with the wires concealed within the collar, such as Wetsounds or HollowPoint. It won't help in this application if you mount to the flat plate. In any case, new penetrations on the top side should conceal the wires from view from most perspectives. Any 'X' mount should bolt up to the flat plates without much trouble. I'd be more concerned that you have enough stand-off so that the pod clears the surrounding tower.

  8. #8
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    5,987

    Default

    have others post up pics with four pods on the oz towers, that plate is horrible for speaker mounts.
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •