08 gravity 3 upgrade

[kaneboats]

The gray elbows are the two inlets. I should have been more clear. I left the big strainer for the cooling system intact. I deleted the strainer for the ballast as it would have worked on only one of the two lines anyway.

[jmvotto]

got it, what are the dimensions of the pvc you used? looks pretty simple, kinda like what jesse did on the larger irritol valves

[kaneboats]

It's all 1". Yes, I got the idea from Jesse and after talking with Daze yesterday while I was in Home Depot I decided to just make it. The whole thing was only about $15. I spent almost that much on the one piece of hose for the second side (forgot the hose clamps though).

[jmvotto]

Man i wish i had my boat here. I am jealous of all these projects. i don't get mine until may 1st.

[jasonwm]

Might need to talk with WM to see if i can exchange it hummm...

Absolutely, just get in touch with us to setup the exchange.

[JesseC]

It's all 1". Yes, I got the idea from Jesse and after talking with Daze yesterday while I was in Home Depot I decided to just make it. The whole thing was only about $15. I spent almost that much on the one piece of hose for the second side (forgot the hose clamps though).

I realized the same thing as you, I priced out using sprinkler parts to build the manifold versus just building one from PVC. I think my manifold alone cost about ten to 15 bucks, I should have done it a long time ago.

[kaneboats]

You know, I hope you consider joining us this year at Lake Sinclair. Lots of us would like to meet you. It ain't that far.

[moombadaze]

You know, I hope you consider joining us this year at Lake Sinclair. Lots of us would like to meet you. It ain't that far.

Second that.