Page 5 of 5 FirstFirst ... 345
Results 41 to 50 of 50
  1. #41
    Join Date
    Aug 2009
    Location
    Montana
    Posts
    2,265

    Default

    GREAT Bought all the fittings/valve today. Will probably winterize the boat next weekend!
    2007 Moomba Outback - waiting for summer!

    Why Not? Play Hard! Get wet

  2. #42
    Join Date
    Jul 2002
    Location
    London Ontario Canada
    Posts
    1,837

    Default

    Quote Originally Posted by deerfield View Post
    DOC - It's a DIY install. My Outback did not come from the factory with a quick disconnect feature in the blue hose that runs water to the dripless shaft seal. Below is a picture of the engine before install and after. You can see where I placed the ball valve. - Stuart
    No , I mean is the dripless system( not the ball valve) diy or oem, mine comes off the exhaust drain coupler , your looks like its coming from the engine water feed tube
    09 21v LAUNCH

    run your engine after you change your oil
    68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
    Doug

  3. #43
    Join Date
    Aug 2009
    Location
    Montana
    Posts
    2,265

    Default

    Quote Originally Posted by DOCDRS View Post
    No , I mean is the dripless system( not the ball valve) diy or oem, mine comes off the exhaust drain coupler , your looks like its coming from the engine water feed tube
    It's OEM Docdrs......Mine looks exactly as Deerfields! Line comes from front as you stated.
    2007 Moomba Outback - waiting for summer!

    Why Not? Play Hard! Get wet

  4. #44
    Join Date
    Jul 2002
    Location
    London Ontario Canada
    Posts
    1,837

    Default

    what does it plumb off of?
    thanks doug
    09 21v LAUNCH

    run your engine after you change your oil
    68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
    Doug

  5. #45
    Join Date
    Aug 2009
    Location
    Montana
    Posts
    2,265

    Default

    Quote Originally Posted by DOCDRS View Post
    what does it plumb off of?
    thanks doug
    Doug,
    It's plumbed off the intake side on the bottom of where the J-tube connects (not sure what that is called?) Here's a pic.
    Attached Images Attached Images
    2007 Moomba Outback - waiting for summer!

    Why Not? Play Hard! Get wet

  6. #46
    Join Date
    Aug 2009
    Location
    Montana
    Posts
    2,265

    Default

    Here's a quick vid of the setup in action for those intersted!

    http://www.youtube.com/watch?v=DilR2Yyu-K0
    2007 Moomba Outback - waiting for summer!

    Why Not? Play Hard! Get wet

  7. #47
    Join Date
    May 2010
    Location
    Quebec City, Quebec, Canada
    Posts
    128

    Default

    Wow good job! I was sceptic, but i'm forced to admit that it seem to works incredibly well.
    ____________
    03 Mobius LSV

  8. #48
    Join Date
    May 2007
    Location
    Richmond, VA
    Posts
    1,780

    Default

    Quote Originally Posted by viking View Post
    Here's a quick vid of the setup in action for those intersted!

    http://www.youtube.com/watch?v=DilR2Yyu-K0
    viking - You are the man! Great video showing exactly how the recirc system works. Near fell out of my chair watching you pan the engine and there is the inline ball valve in the blue hose to the dripless shaft seal. Like I was looking at my own boat. Neat. Gotta confess first time a cranked the engine I was sweatin' bullets that the recirc system would fail to draw from the tank and I'd damage the raw and engine cooling water pumps. Man, did I breath a sigh of relief when liquid came out the exhaust. Pretty cool to see something actually work. Any way, nice work and thanks for posting. - Deerfield
    2007 Outback
    2012 RAM Crew Cab
    Stuart

  9. #49
    Join Date
    Aug 2009
    Location
    Montana
    Posts
    2,265

    Default

    deerfield...........I just posted the vid and pretty much copied "your" system. You deserve all the credit

    But it does work extremely well. And the shut off valve for the dripless seal works like a charm. What an easy/simple fix!
    2007 Moomba Outback - waiting for summer!

    Why Not? Play Hard! Get wet

  10. #50
    Join Date
    Dec 2012
    Location
    Trois-Rivieres, Quebec
    Posts
    125

    Default

    Hi all,
    I have a 2006 outback. I also use the recirculating system and it works perfect. I do not drain the antifreeze from the block. My boat is in my garage all winter long and is always over freezing point....my car is outside freezing (I'm from Quebec...).
    I don't have that blue hose for the dripless seal. I think that's new starting in 2007??? Right ?

    I will have a new 2014 Mondo next summer. Will I have a cooling line for the shaft seal??

    Here's a pic of my system....image.jpg

    Thanks
    Last edited by Sampp1963; 03-02-2014 at 09:15 AM.
    Sampp

    2014 Mondo

    Could be worst
    From nice Québec..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •